You’ve probably heard about the many benefits of asphalt driveways, but have you considered buying them yourself? Not only will they last longer than regular concrete, but they are also much easier to maintain. Just a few tips will help you determine if asphalt driveways are right for you.
Look at the appearance of your driveway. Does it look as if it is uneven, faded, or dirty? If so, then you may want to consider another material, such as concrete or stone. These two materials are a bit more expensive but they last much longer and require less maintenance. Stone, for instance, will need to be repainted every twenty years or so. Concrete, on the other hand, will need to be repainted every five years or so.
The next thing you should do before deciding on which type of driveway is right for your home or business in Miami is to take a look at your local zoning regulations. Although most Miami-Dade County municipalities allow driveways made from asphalt, some require more specific conditions than others. Some driveways will need to be painted to prevent damage to the surrounding environment.
Driveways constructed from asphalt will last longer than those constructed from concrete. These materials don’t lose their integrity, like other types of driveway do. They are also not subject to constant weathering and deterioration due to the elements. You can also opt to add a layer of concrete around the exterior of your driveway, in order to prevent rain and snow from penetrating through and damaging the pavement. It is very important to follow these rules, however, because there is a chance that a layer of concrete will crack and become unstable.
If you choose to put concrete around your driveway, make sure you prepare the ground by clearing away any debris and weeds. This should include leaves, branches, tree roots, and other items that could get through the concrete. Once you have cleared the area, you will need to fill in the holes with concrete mix. Mixing the concrete yourself may save you a little money, but it will also require the time and energy of a professional. You also need to make sure you fill the holes entirely.
After you have filled your driveway completely, it’s time to install the pavement. Make sure you are placing a layer of concrete in between the existing concrete and the top surface of your driveway, as well as on top of the existing concrete. In order to prevent water from leaking underneath your new concrete, you can place a rubber mat below the pavement, as this will prevent water from seeping through and causing water damage to the concrete.
In order to install asphalt driveways Miami correctly, you will also need to know how to properly lay the pavement properly. First, you must be careful to lay the concrete at an angle so that it doesn’t lean too far into the ground. The bottom edge of your driveway should be approximately two feet above the ground surface. Make sure you make sure that the concrete stays level and does not dig into the ground underneath.
Once the concrete has been laid properly, the next step is to sand and seal the pavement. Sealant should be applied to protect the concrete from water, snow, wind, and insects. When you have done all of these steps, you can now begin the installation process by applying a coating of asphalt paint on the driveway. If you have a very steep driveway, it may be a good idea to hire a professional in order to remove any excess concrete that may be lying beneath the surface of the pavement. After this, you can finally seal the driveway with sealant and grout, making sure that it completely covers the surface of the driveway.